Request advice
DE FR IT EN

+41 55 616 10 00
info@swisscobots.ch

Kassow Robots · 7-axis cobot

KR810

The compact one for tight cells

Fast 7-axis cobot with 850 mm reach, 10 kg payload and the smallest mounting footprint of the family (130 × 130 mm).

from CHF 29’100 ex works

Kassow KR810 – compact 7-axis cobot
Workspace · R 850 mm10 kg · 7 axes
10kgPayload
850mmReach
225°/sJoint speed
26kgWeight

KR810: the compact 7-axis cobot for tight cells

The KR810 from Kassow Robots is the smallest robot arm in the KR family – and yet no lightweight in performance. With 850 mm reach, 10 kg payload and 225 °/s on all seven axes, it works as fast as industrial production demands. Its mounting footprint is only 130 × 130 mm. This makes it the ideal cobot for Switzerland, where shop-floor and machine-room space is often limited.

Where space is scarce, the 7th axis plays to its strengths: the elbow avoids machine doors, clamping fixtures and obstacles while the tool stays exactly on course. The KR810 therefore also reaches into small machining areas that would be difficult for a conventional 6-axis robot to access.

Applications of the KR810

  • CNC machine tending: It loads milling machines and lathes with parts from 10 to 100 mm. SwissCobots has implemented the KR810 as a complete loading system with a Haas VF-2SS and an SKT15 lathe.
  • Pick & place in the tightest of spaces, for example between a conveyor belt and an inspection station.
  • Assembly, inspection and laboratory: clean, precise and repeatable (± 0.03 mm).
  • Mobile applications: as an Edge Edition with the controller in the base for AMR and AGV.

Why the KR810 suits SwissCobots

At only 26 kg, the KR810 is also easy to relocate: the controller and operating module move with it, so you can deploy the robot at another workstation if needed. IP54 protection and a noise level below 65 dB allow use right on the shop floor, next to employees and machines.

For CNC machine tending, the KR810 is our most compact solution: it stands on the workbench with a perforated workpiece plate next to the machine, picks up raw parts and puts them back down after machining – also overnight and at weekends. Thanks to tablet operation and hand guiding at the flange, your employees quickly learn to teach the robot themselves.

Together with you, we check payload including gripper, reach and cycle time using your original parts, and we prepare the risk assessment. Ask now for a demo or a quotation for your KR810.

Kassow KR810 – compact 7-axis cobot
Ideal for

KR810

01

Machine tending in compact CNC cells

02

Pick & place in tight spaces

03

Assembly, inspection, laboratory

04

Mobile applications (Edge Edition)

In detail

Design you can see.

Seven joints, a slim base, hand guiding right at the flange: the details of the KR series in motion.

The 7th axisThe additional degree of freedom in the elbow: the arm reaches around obstacles and into tight spaces (Source: Kassow Robots)Source: Kassow Robots
Aluminium jointsRobust aluminium housings: only four housing sizes for all KR models (Source: Kassow Robots)Source: Kassow Robots
Hand guiding (backdrive)Teach waypoints by hand guiding at the flange (Source: Kassow Robots)Source: Kassow Robots
Small mounting footprintSlim base: fits into tight cells and directly next to machines (Source: Kassow Robots)Source: Kassow Robots
Technical data

KR810 in detail.

All specifications according to Kassow Robots. For your application we check payload including gripper, centre of gravity and dynamics.

Reach850 mm
Payload10 kg
Weight26 kg
Degrees of freedom7 rotary joints
Joint speed225 °/s (all axes)
Joint rangesJ2 and J4: −70° / +180°; J1, J3, J5, J6, J7: ± 360°
Repeatability± 0.03 mm
Redundant absolute encodersYes
Footprint standard base130 × 130 mm
Footprint Edge Edition160 × 200 mm
Operating temperature0–45 °C
MaterialAluminium
Ingress protectionIP54
Noise level< 65 dB

* A risk assessment is required for every robot installation. It clarifies whether the application can be operated with or without protective devices.

Software, interfaces and safety functions at a glance

All documents for the KR810 (18)

Prices

Prices KR810.

Transparent list prices: base price per version, options as surcharge. Everything ex works, further services on quotation.

KR Series

CHF 29’100

Base price ex works

Classic version with external control cabinet.

Scope of delivery: Robot arm, Control cabinet, Teach-Panel, Cables.

Options (surcharge)
OptionSurcharge
Warranty extension +12 monthsCHF 1300
Profinet upgrade of the controllerCHF 1100
Edge Edition

CHF 31’100

Base price ex works

Controller in the robot base: compact, ready for AMR and AGV.

Scope of delivery: Robot arm, Teach-Panel, Cables.

Options (surcharge)
OptionSurcharge
Warranty extension +12 monthsCHF 1300
Integrated controller with ProfinetCHF 1100
External power supplyCHF 840

Prices in CHF, ex works, excl. VAT. All prices exclude training, on-site commissioning, customer-specific preliminary projects, trials, etc. – these are provided on quotation. Hourly rate CHF 160.–.

Price list 2026 · Version 1.0, as of 28.09.2026

References with the KR810

How customers use it.

More models

The whole KR family.

To the model comparison

Experience the KR810 live.

We show you the KR810 with your parts – including an honest assessment of cycle time, gripper and profitability.

KR81010 kg · 850 mm
Request a quote