Request advice
DE FR IT EN

+41 55 616 10 00
info@swisscobots.ch

SwissCobots Systems

SwissCobots Systems: loading, clamping, gripping

Our building blocks for CNC machine tending: loading system, workbench with workpiece plate, vice system and pneumatic grippers – developed and manufactured for Kassow cobots.

A cobot alone does not yet load a machine. That requires peripherals: a station for raw and finished parts, a gripper and, for milling machines, an automatic vice. SwissCobots has developed its own systems for this purpose, which fit all robots of the KR series and can be combined into a complete loading system. The layouts are each available as a PDF.

01 · Loading system

Mobile loading system – right where it is needed.

Cobot, controller and workpiece rack sit on a mobile base. The system can thus be rolled up to the machine in question and combined with the self-closing vice and the machine door.

  • Cobot, controller and workpiece plate on one trolley
  • For CNC lathes and milling machines, including existing machines
  • Individually designed: we engineer the system for your parts and your space
CAD view 1 of the system “KR1410 mobile loading system”
Workbench with perforated workpiece plate as a loading station for cobots
02 · Workbench

Workbench with workpiece plate & clamping prisms.

The sturdy workbench carries the cobot and, in the base, the controller. The perforated workpiece plate holds the raw parts precisely in clamping prisms – the cobot always finds every part in the same place.

25mmHole grid
25–100mmAdjustable pitch (25 / 50 / 75 / 100)
100–200Workpieces (approx.) per plate
10–100mmWorkpiece size

The grid can be re-tooled for different pitches. This way different parts end up on the same plate without new fixtures, and the cobot keeps working after hours.

03 · Vice

Vice system that closes by itself.

The pneumatic vice clamps the workpiece in the CNC machine automatically. The cobot inserts it, clamping is triggered by a signal – with no manual intervention at all.

40kNClamping force at 6.5 bar
AutoSelf-closing
CustomClamping jaws made to measure
  • Customer-specific clamping jaws for your workpiece
  • Can be combined with a self-closing machine door
  • Part of the SwissCobots loading system for lathes and milling machines
Automatic vice system from SwissCobots for CNC milling machines
Detail view of the automatic vice system from SwissCobots
SwissCobots pneumatic gripper with robot adapter
Technical drawing of the SwissCobots pneumatic gripper
04 · Gripper

Pneumatic gripper for every workpiece.

Our pneumatic grippers come in various sizes. They hold parts from 10 to 100 mm and are supplied with a robot adapter that fits all models of the KR series.

10–100mmWorkpiece size
AllKR models with robot adapter
  • Various sizes for different parts
  • Robot adapter for all KR models
Our speciality

CNC machine tending that simply runs.

With our own loading systems made up of workbench, workpiece plate, gripper and vice we automate lathes and milling machines – including existing machines and small batch sizes.

Pick up the workpiece

The cobot picks the raw part precisely from the workpiece plate with the pneumatic SwissCobots gripper.

Insert & clamp

It places the part in the chuck or the vice. The clamping devices close automatically – clamping jaws can also be workpiece-specific.

Close door & machine

As soon as the robot has moved out of the working area, the door closes and the machine starts the programme.

Open door & remove

After machining the door opens, the clamping device releases and the cobot removes the finished part.

Put down & continue

The finished part goes back on the workpiece plate – and the cycle starts with the next position. Even after hours.

3D still: KR1410 on CNC lathe
Schematic · KR1410 on CNC lathe
Schematic 3D view – rotate with the mouseswipe with your finger · double-click resets the view

Schematic representation of the process – system, parts and dimensions are simplified and not to scale.

Your system, individually designed.

Send us a drawing, sample or photo of your parts and machine. We will suggest a suitable loading system.